{"product_id":"230v-12-20a-retrofit-soft-starter-module-power-tools","title":"230V 12-20A Retrofit Soft Starter Module for Power Tools","description":"\u003ch2\u003e230V 12–20A Retrofit Soft Starter Module — Smooth, Controlled Power Tool Starts\u003c\/h2\u003e\n\u003cp\u003eUpgrade your power tools with this \u003cstrong\u003e230V 12–20A Retrofit Soft Starter Current Limiter Module\u003c\/strong\u003e — a compact, easy-to-install electronic module designed to give your machines a smooth, gradual ramp-up to full speed instead of a jarring, abrupt start. Ideal for angle grinders, circular saws, routers, planers, and other high-powered tools, this retrofit module helps extend motor life, reduces mechanical stress on drive components, and keeps your workspace safer by eliminating violent start-up torque.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide current range:\u003c\/strong\u003e Supports 12–20A loads (up to 3,450W \/ 15A continuous) at 230V AC — compatible with a broad range of power tools and machines\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSmooth soft-start ramp:\u003c\/strong\u003e After installation, your tool reaches full operating speed gradually in approximately 1–2 seconds, eliminating sudden torque spikes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSimple retrofit design:\u003c\/strong\u003e Comes with 2 pre-wired connecting wires for straightforward in-line installation — no special tools or extensive wiring knowledge required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDust-proof enclosure:\u003c\/strong\u003e The module housing features a dust-proof back package, keeping internal components protected in workshop environments\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact \u0026amp; lightweight:\u003c\/strong\u003e Small form factor fits neatly inside tool housings or junction boxes without adding bulk\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal compatibility:\u003c\/strong\u003e Designed as a retrofit module suitable for a wide range of 230V single-phase power tools and machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow It Works\u003c\/h3\u003e\n\u003cp\u003eA soft starter module controls the voltage ramp delivered to your tool's motor at start-up. Instead of receiving full mains voltage instantly, the motor sees a gradually increasing voltage over 1–2 seconds — reaching full speed smoothly. This protects motor windings, brushes, gears, and workpieces from the mechanical shock of a hard start, and also reduces the inrush current spike on your electrical circuit.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1× 230V 12–20A Retrofit Soft Starter Module\u003c\/li\u003e\n  \u003cli\u003e2× Pre-attached connecting wires\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 230V AC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCurrent Range:\u003c\/strong\u003e 12–20A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Continuous Load:\u003c\/strong\u003e 15A \/ 3,450W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSoft-Start Ramp Time:\u003c\/strong\u003e ~1–2 seconds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e 2 connecting wires included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Dust-proof enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor guidance on safe electrical installation and wiring practices in workshop environments, refer to resources from the \u003ca href=\"https:\/\/www.osha.gov\/electrical\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eU.S. Occupational Safety and Health Administration (OSHA) — Electrical Safety\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4\u003eQ: What does a soft starter module do for my power tools?\u003c\/h4\u003e\n\u003cp\u003eA: A soft starter module controls the voltage delivered to your tool's motor at start-up, allowing it to ramp up gradually to full speed over approximately 1–2 seconds. This eliminates the abrupt, jarring start typically associated with high-powered tools, reducing mechanical stress on motor components, gears, and brushes — and lowering inrush current on your electrical circuit.\u003c\/p\u003e\n\u003ch4\u003eQ: Which tools is this 230V 12–20A retrofit soft starter module compatible with?\u003c\/h4\u003e\n\u003cp\u003eA: This module is designed for single-phase 230V power tools and machines drawing between 12–20A, such as angle grinders, circular saws, woodworking routers, planers, and similar workshop equipment. Always verify your tool's voltage and current draw before installation.\u003c\/p\u003e\n\u003ch4\u003eQ: Is this soft starter module easy to install?\u003c\/h4\u003e\n\u003cp\u003eA: Yes — the module comes pre-fitted with 2 connecting wires for straightforward in-line wiring. It is designed as a retrofit unit that can be installed inside a tool housing or an external junction box. Basic electrical knowledge is recommended; if unsure, consult a qualified electrician for safe installation.\u003c\/p\u003e\n\u003ch4\u003eQ: What is the maximum load this module can handle?\u003c\/h4\u003e\n\u003cp\u003eA: The module supports a continuous current load of up to 15A (3,450W) at 230V AC, with a peak rating of up to 20A for start-up surge handling. Do not exceed the rated load to ensure safe and reliable operation.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does a soft starter module do for my power tools?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A soft starter module controls the voltage delivered to your tool's motor at start-up, allowing it to ramp up gradually to full speed over approximately 1–2 seconds. This eliminates the abrupt, jarring start typically associated with high-powered tools, reducing mechanical stress on motor components, gears, and brushes — and lowering inrush current on your electrical circuit.\"}}, {\"@type\": \"Question\", \"name\": \"Which tools is this 230V 12–20A retrofit soft starter module compatible with?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This module is designed for single-phase 230V power tools and machines drawing between 12–20A, such as angle grinders, circular saws, woodworking routers, planers, and similar workshop equipment. Always verify your tool's voltage and current draw before installation.\"}}, {\"@type\": \"Question\", \"name\": \"Is this soft starter module easy to install?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes — the module comes pre-fitted with 2 connecting wires for straightforward in-line wiring. It is designed as a retrofit unit that can be installed inside a tool housing or an external junction box. Basic electrical knowledge is recommended; if unsure, consult a qualified electrician for safe installation.\"}}, {\"@type\": \"Question\", \"name\": \"What is the maximum load this module can handle?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The module supports a continuous current load of up to 15A (3,450W) at 230V AC, with a peak rating of up to 20A for start-up surge handling. Do not exceed the rated load to ensure safe and reliable operation.\"}}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"BreadcrumbList\", \"itemListElement\": [{\"@type\": \"ListItem\", \"position\": 1, \"name\": \"Home\", \"item\": \"https:\/\/vpggdm-rp.myshopify.com\/\"}, {\"@type\": \"ListItem\", \"position\": 2, \"name\": \"Hand Tools \u0026 Hardware\", \"item\": \"https:\/\/vpggdm-rp.myshopify.com\/collections\/hand-tools-hardware\"}, {\"@type\": \"ListItem\", \"position\": 3, \"name\": \"230V 12-20A Retrofit Soft Starter Module for Power Tools\", \"item\": \"https:\/\/vpggdm-rp.myshopify.com\/products\/230v-12-20a-retrofit-soft-starter-module-power-tools\"}]}\u003c\/script\u003e","brand":"Qme","offers":[{"title":"Other \/ Onesize","offer_id":49759751209174,"sku":"14:200004889#Onesize;35:100009342","price":18.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0827\/5243\/8486\/files\/Sa0ffad9b123a469f886872b8f88dfec4b.webp?v=1785326777","url":"https:\/\/qmeboost.com\/products\/230v-12-20a-retrofit-soft-starter-module-power-tools","provider":"Qme","version":"1.0","type":"link"}