{"product_id":"3s-4s-li-ion-lithium-bms-battery-protection-board-18650-40a-60a","title":"3S 4S Li-ion BMS Battery Protection Board 40A 60A 18650","description":"\u003ch2\u003e3S \/ 4S Li-ion Lithium Battery Protection Board (BMS) — 40A \/ 60A\u003c\/h2\u003e\n\u003cp\u003eKeep your lithium battery packs running safely and efficiently with this versatile \u003cstrong\u003eBattery Management System (BMS) Protection Board\u003c\/strong\u003e. Designed for 3S (11.1V \/ 12.6V) and 4S (14.8V \/ 16.8V) configurations, this board delivers overcharge, over-discharge, and short-circuit protection for 18650 Li-ion cell packs used in drills, motors, e-bikes, RC vehicles, power tools, and DIY battery builds. Available in 6 options to match your build requirements.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide Compatibility:\u003c\/strong\u003e Supports 3S (11.1V \/ 12.6V) and 4S (14.8V \/ 16.8V) Li-ion lithium battery configurations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Current Ratings:\u003c\/strong\u003e Available in 40A and 60A continuous discharge ratings for demanding applications\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt-in Balance Function:\u003c\/strong\u003e Actively balances individual cells during charging for extended pack life and consistent performance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOvercharge Protection:\u003c\/strong\u003e Automatically cuts off charge when any single cell reaches 4.2V, preventing damage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOver-discharge Protection:\u003c\/strong\u003e Disconnects load when cell voltage drops too low, protecting cell integrity\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShort-circuit \u0026amp; Overcurrent Protection:\u003c\/strong\u003e Instantly shuts down output upon detecting unsafe current conditions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible with 18650 Cells:\u003c\/strong\u003e Ideal for custom battery packs using standard 18650 cylindrical cells\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact PCB Design:\u003c\/strong\u003e Low-profile board fits neatly into battery enclosures and DIY builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCell Configuration:\u003c\/strong\u003e 3S or 4S Li-ion \/ LiPo\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNominal Voltage (3S):\u003c\/strong\u003e 11.1V | Charge Cutoff: 12.6V\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNominal Voltage (4S):\u003c\/strong\u003e 14.8V | Charge Cutoff: 16.8V\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContinuous Discharge Current:\u003c\/strong\u003e 40A or 60A (depending on variant selected)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCell Overcharge Cutoff:\u003c\/strong\u003e 4.2V per cell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBalance Resistor:\u003c\/strong\u003e 430Ω (activates when any cell exceeds 4.2V during first solder or active charging)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Cell Type:\u003c\/strong\u003e 18650 Li-ion and similar cylindrical cells\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Drills, motors, e-bikes, RC vehicles, power tool battery packs, DIY projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant Usage Notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eWhen soldering the battery for the first time, or while charging is in progress, if any single cell voltage exceeds 4.2V, the 430Ω balance resistor will activate and discharge the cell (down to approximately 4.19V) — this is normal operation.\u003c\/li\u003e\n  \u003cli\u003eIf the 430Ω resistor becomes excessively hot during use, verify that all wiring connections are correct and no wires are reversed.\u003c\/li\u003e\n  \u003cli\u003eAlways double-check polarity and wiring before powering on your pack to ensure safe operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Choose This BMS Protection Board?\u003c\/h3\u003e\n\u003cp\u003eWhether you're rebuilding a drill battery pack, assembling a custom motor power supply, or engineering a DIY energy storage project, this BMS board provides the essential safeguards your lithium cells need. The integrated cell balancing circuit ensures all cells age evenly, maximizing your pack's usable capacity and longevity — making it a smart investment for hobbyists and professionals alike.\u003c\/p\u003e\n\n\u003cp\u003eFor more information on lithium battery safety best practices, visit the U.S. Consumer Product Safety Commission (CPSC) Lithium Battery Safety Resource.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4\u003eQ: What does a BMS lithium battery protection board do?\u003c\/h4\u003e\n\u003cp\u003eA: A Battery Management System (BMS) protection board monitors and manages the charging and discharging of lithium battery cell packs. This 3S\/4S BMS board protects against overcharge (above 4.2V per cell), over-discharge, overcurrent, and short-circuits. It also includes a cell-balancing function that equalizes voltage across all cells in the pack, extending overall battery life and maintaining consistent performance in drills, motors, and other power tool applications.\u003c\/p\u003e\n\u003ch4\u003eQ: What is the difference between the 3S and 4S configurations?\u003c\/h4\u003e\n\u003cp\u003eA: \"3S\" means three lithium cells connected in series, producing a nominal voltage of 11.1V with a full-charge cutoff of 12.6V. \"4S\" means four cells in series, producing a nominal voltage of 14.8V with a full-charge cutoff of 16.8V. Choose your configuration based on the voltage requirements of your drill, motor, or other device. Both configurations are available in 40A or 60A current ratings.\u003c\/p\u003e\n\u003ch4\u003eQ: Why does the 430Ω balance resistor get warm during charging?\u003c\/h4\u003e\n\u003cp\u003eA: The 430Ω resistor is part of the cell-balancing circuit. When any single cell's voltage exceeds 4.2V — which can occur during the first soldering session or during active charging — the resistor activates to bleed off excess charge and bring that cell back down to approximately 4.19V. Some warmth is normal during this process. However, if the resistor becomes excessively hot, immediately check all wiring connections to ensure nothing is reversed or incorrectly connected.\u003c\/p\u003e\n\u003ch4\u003eQ: Is this board compatible with standard 18650 lithium cells?\u003c\/h4\u003e\n\u003cp\u003eA: Yes. This BMS protection board is designed to work with standard 18650 Li-ion cylindrical cells, which are among the most common cells used in power tool battery packs, DIY energy storage systems, and motor-driven devices. It supports both 3S and 4S cell arrangements depending on the variant you select.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does a BMS lithium battery protection board do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A Battery Management System (BMS) protection board monitors and manages the charging and discharging of lithium battery cell packs. This 3S\/4S BMS board protects against overcharge (above 4.2V per cell), over-discharge, overcurrent, and short-circuits. It also includes a cell-balancing function that equalizes voltage across all cells in the pack, extending overall battery life and maintaining consistent performance in drills, motors, and other power tool applications.\"}}, {\"@type\": \"Question\", \"name\": \"What is the difference between the 3S and 4S configurations?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"\\\"3S\\\" means three lithium cells connected in series, producing a nominal voltage of 11.1V with a full-charge cutoff of 12.6V. \\\"4S\\\" means four cells in series, producing a nominal voltage of 14.8V with a full-charge cutoff of 16.8V. Choose your configuration based on the voltage requirements of your drill, motor, or other device. Both configurations are available in 40A or 60A current ratings.\"}}, {\"@type\": \"Question\", \"name\": \"Why does the 430Ω balance resistor get warm during charging?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The 430Ω resistor is part of the cell-balancing circuit. When any single cell's voltage exceeds 4.2V — which can occur during the first soldering session or during active charging — the resistor activates to bleed off excess charge and bring that cell back down to approximately 4.19V. Some warmth is normal during this process. However, if the resistor becomes excessively hot, immediately check all wiring connections to ensure nothing is reversed or incorrectly connected.\"}}, {\"@type\": \"Question\", \"name\": \"Is this board compatible with standard 18650 lithium cells?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. This BMS protection board is designed to work with standard 18650 Li-ion cylindrical cells, which are among the most common cells used in power tool battery packs, DIY energy storage systems, and motor-driven devices. It supports both 3S and 4S cell arrangements depending on the variant you select.\"}}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"BreadcrumbList\", \"itemListElement\": [{\"@type\": \"ListItem\", \"position\": 1, \"name\": \"Home\", \"item\": \"https:\/\/vpggdm-rp.myshopify.com\/\"}, {\"@type\": \"ListItem\", \"position\": 2, \"name\": \"Hand Tools \u0026 Hardware\", \"item\": \"https:\/\/vpggdm-rp.myshopify.com\/collections\/hand-tools-hardware\"}, {\"@type\": \"ListItem\", \"position\": 3, \"name\": \"3S 4S Li-ion BMS Battery Protection Board 40A 60A 18650\", \"item\": \"https:\/\/vpggdm-rp.myshopify.com\/products\/3s-4s-li-ion-lithium-bms-battery-protection-board-18650-40a-60a\"}]}\u003c\/script\u003e","brand":"Qme","offers":[{"title":"3S60ABalance","offer_id":49756651389142,"sku":"14:350850#3S60ABalance","price":12.89,"currency_code":"USD","in_stock":true},{"title":"4S40AEnhance","offer_id":49756651421910,"sku":"14:1254#4S40AEnhance","price":12.89,"currency_code":"USD","in_stock":true},{"title":"3S40ABalance","offer_id":49756651454678,"sku":"14:365458#3S40ABalance","price":12.89,"currency_code":"USD","in_stock":true},{"title":"3S60AEnhance","offer_id":49756651487446,"sku":"14:193#3S60AEnhance","price":12.89,"currency_code":"USD","in_stock":true},{"title":"4S40ABalance","offer_id":49756651520214,"sku":"14:173#4S40ABalance","price":12.89,"currency_code":"USD","in_stock":true},{"title":"3S40AEnhance","offer_id":49756651552982,"sku":"14:771#3S40AEnhance","price":12.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0827\/5243\/8486\/files\/Saacfaa03ba6c4f089f0a95829a80c348N.webp?v=1785325023","url":"https:\/\/qmeboost.com\/products\/3s-4s-li-ion-lithium-bms-battery-protection-board-18650-40a-60a","provider":"Qme","version":"1.0","type":"link"}