{"product_id":"usb-c-poe-splitter-100mbps-48v-5v-power-supply-module-ethernet","title":"USB-C PoE Splitter 100Mbps 48V to 5V Power Module | Qme","description":"\u003ch2\u003eUSB-C PoE Splitter — Power Any USB-C Device Over Ethernet\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUSB-C PoE Splitter\u003c\/strong\u003e is a compact, plug-and-play networking accessory that converts 48V Power over Ethernet (PoE) into a stable 5V USB Type-C output. Running at \u003cstrong\u003e100Mbps Fast Ethernet\u003c\/strong\u003e, it lets you simultaneously deliver data and power to USB-C devices — no extra power adapter or wall outlet required. Ideal for IP cameras, Raspberry Pi boards, smart displays, media players, and any USB-C powered device you want to connect to a PoE network.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoE Input:\u003c\/strong\u003e 48V IEEE 802.3af-compatible PoE input via standard RJ45 Ethernet port\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUSB-C Output:\u003c\/strong\u003e Regulated 5V DC output through a USB Type-C connector — no adapters needed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e100Mbps Fast Ethernet:\u003c\/strong\u003e Passes through a full 100Mbps data connection while splitting power\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePassive \u0026amp; Active PoE Support:\u003c\/strong\u003e Works with both active (802.3af) and passive 48V PoE injectors\/switches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact Module Design:\u003c\/strong\u003e Small form factor — easy to mount, tuck away, or integrate into an enclosure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide Compatibility:\u003c\/strong\u003e Powers Raspberry Pi, IP cameras, streaming sticks, smart sensors, and other 5V USB-C devices\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReliable Build:\u003c\/strong\u003e Stable voltage regulation ensures consistent, protected power delivery\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play:\u003c\/strong\u003e No software, drivers, or configuration required — ready to use immediately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 48V DC (via PoE)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 5V DC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eData Rate:\u003c\/strong\u003e 100Mbps Fast Ethernet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput Port:\u003c\/strong\u003e RJ45 (PoE)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput Port:\u003c\/strong\u003e USB Type-C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoE Standard:\u003c\/strong\u003e IEEE 802.3af \/ Passive 48V PoE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Qme\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow It Works\u003c\/h3\u003e\n\u003cp\u003eSimply connect your PoE-enabled switch or injector to the splitter's RJ45 input. The module separates the power from the data signal — delivering 5V USB-C power to your device while passing the 100Mbps Ethernet data signal through a second RJ45 port to your connected device. It's a clean, cable-managed solution for powering USB-C devices in locations where running a separate power cable isn't practical.\u003c\/p\u003e\n\n\u003ch3\u003ePerfect For\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePowering Raspberry Pi or single-board computers via PoE\u003c\/li\u003e\n  \u003cli\u003eIP security cameras and smart home sensors\u003c\/li\u003e\n  \u003cli\u003eNetwork-connected digital signage and displays\u003c\/li\u003e\n  \u003cli\u003eRemote or hard-to-reach installations where power outlets are unavailable\u003c\/li\u003e\n  \u003cli\u003eClean cable management in office or home network setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information on Power over Ethernet standards, visit the U.S. Department of Energy — Energy-Efficient Electronics resource.\u003c\/p\u003e\n\n\u003cp\u003eLearn more: \u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Power_over_Ethernet\" target=\"_blank\" rel=\"noopener\"\u003ePower over Ethernet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4\u003eQ: What does a USB-C PoE Splitter do and how does it work?\u003c\/h4\u003e\n\u003cp\u003eA: A USB-C PoE Splitter takes a 48V Power over Ethernet (PoE) signal from a PoE switch or injector and splits it into two outputs: a 5V USB Type-C power output for your device, and a 100Mbps Ethernet data pass-through. This allows you to power a USB-C device and connect it to a network using just a single Ethernet cable — no wall outlet needed at the device end.\u003c\/p\u003e\n\u003ch4\u003eQ: Which devices are compatible with this USB-C PoE Splitter?\u003c\/h4\u003e\n\u003cp\u003eA: This PoE splitter is compatible with any device that accepts 5V power via a USB Type-C connector, including Raspberry Pi boards, IP cameras, mini PCs, streaming sticks, smart sensors, and similar electronics. It works with PoE switches and injectors that output 48V (IEEE 802.3af or passive 48V PoE).\u003c\/p\u003e\n\u003ch4\u003eQ: Do I need a special PoE switch to use this splitter?\u003c\/h4\u003e\n\u003cp\u003eA: You need either a PoE-enabled network switch or a PoE injector that outputs 48V power. The splitter is compatible with IEEE 802.3af active PoE as well as passive 48V PoE injectors. Standard non-PoE switches will not provide the power input the splitter needs to function.\u003c\/p\u003e\n\u003ch4\u003eQ: Is any setup or configuration required?\u003c\/h4\u003e\n\u003cp\u003eA: No — this is a completely plug-and-play device. Simply connect your PoE source to the input RJ45 port, connect your USB-C device to the 5V output, and connect your network device to the data-pass RJ45 port. No drivers, software, or configuration are needed.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does a USB-C PoE Splitter do and how does it work?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A USB-C PoE Splitter takes a 48V Power over Ethernet (PoE) signal from a PoE switch or injector and splits it into two outputs: a 5V USB Type-C power output for your device, and a 100Mbps Ethernet data pass-through. This allows you to power a USB-C device and connect it to a network using just a single Ethernet cable — no wall outlet needed at the device end.\"}}, {\"@type\": \"Question\", \"name\": \"Which devices are compatible with this USB-C PoE Splitter?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This PoE splitter is compatible with any device that accepts 5V power via a USB Type-C connector, including Raspberry Pi boards, IP cameras, mini PCs, streaming sticks, smart sensors, and similar electronics. It works with PoE switches and injectors that output 48V (IEEE 802.3af or passive 48V PoE).\"}}, {\"@type\": \"Question\", \"name\": \"Do I need a special PoE switch to use this splitter?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You need either a PoE-enabled network switch or a PoE injector that outputs 48V power. The splitter is compatible with IEEE 802.3af active PoE as well as passive 48V PoE injectors. Standard non-PoE switches will not provide the power input the splitter needs to function.\"}}, {\"@type\": \"Question\", \"name\": \"Is any setup or configuration required?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No — this is a completely plug-and-play device. Simply connect your PoE source to the input RJ45 port, connect your USB-C device to the 5V output, and connect your network device to the data-pass RJ45 port. No drivers, software, or configuration are needed.\"}}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"BreadcrumbList\", \"itemListElement\": [{\"@type\": \"ListItem\", \"position\": 1, \"name\": \"Home\", \"item\": \"https:\/\/vpggdm-rp.myshopify.com\/\"}, {\"@type\": \"ListItem\", \"position\": 2, \"name\": \"Phone \u0026 Cable Accessories\", \"item\": \"https:\/\/vpggdm-rp.myshopify.com\/collections\/phone-cable-accessories\"}, {\"@type\": \"ListItem\", \"position\": 3, \"name\": \"USB-C PoE Splitter 100Mbps 48V to 5V Power Module | Qme\", \"item\": \"https:\/\/vpggdm-rp.myshopify.com\/products\/usb-c-poe-splitter-100mbps-48v-5v-power-supply-module-ethernet\"}]}\u003c\/script\u003e","brand":"Qme","offers":[{"title":"Black","offer_id":49707923374294,"sku":"14:771#Black","price":37.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0827\/5243\/8486\/files\/S2ea42791485a4745921c7858ee81832dN_72d8fef9-67af-4287-8ca8-5f7620f0a9b8.webp?v=1785186066","url":"https:\/\/qmeboost.com\/products\/usb-c-poe-splitter-100mbps-48v-5v-power-supply-module-ethernet","provider":"Qme","version":"1.0","type":"link"}