1/4" Stereo Audio Panel Mount Jack Female Connector – 10 Pack
1/4" Stereo Audio Panel Mount Jack Female Connector – 10 Pack
1/4" (6.35mm) Stereo Audio Female Panel Mount Jack Connectors – 10 Pack
Upgrade your audio builds and repairs with these reliable 1/4 inch (6.35mm) stereo TRS panel mount jack connectors. Whether you're wiring a guitar amplifier, building a custom audio interface, patching a studio rack, or repairing audio equipment, these solder-type chassis mount jacks deliver solid, consistent connectivity every time.
Each connector features a standard 6.35mm (1/4") stereo (TRS) configuration, making it compatible with standard instrument cables, headphone jacks, and balanced audio lines. The panel-mount design allows you to securely fasten the jack to any enclosure, chassis, or DIY audio panel for a professional, permanent installation.
Key Features
- Size: 6.35mm / 1/4" standard audio jack
- Type: Stereo TRS (Tip-Ring-Sleeve) female connector
- Mount Style: Panel / chassis mount — solder terminal type
- Pack Quantity: 10 connectors per pack — great value for builds and repairs
- Compatibility: Works with guitars, amplifiers, mixers, audio interfaces, headphone jacks, and more
- Construction: Durable metal and plastic housing with soldering lugs for secure wiring
- Application: Suitable for both stereo (TRS) and mono (TS) panel installations
Who Is This For?
These panel-mount audio jacks are perfect for:
- DIY audio enthusiasts and electronics hobbyists
- Guitar and amplifier builders
- Studio and home recording setup builders
- Electronics repair technicians
- Makers and engineers working on custom audio enclosures
Installation Tips
Each jack is designed for soldered wire connections. Drill or cut a standard-sized hole in your enclosure panel, insert the jack, and secure it with the included nut. Solder your signal, ring, and ground wires to the corresponding terminals for a clean, permanent connection. Always double-check your wiring diagram before soldering to ensure correct channel assignment.
For guidance on safe electronics soldering practices, visit the OSHA Soldering Safety Resources page.
Frequently Asked Questions
Q: What is a 1/4" stereo panel mount audio jack connector used for?
A: A 1/4" (6.35mm) stereo TRS panel mount audio jack is used to create a fixed audio input or output point on an enclosure, amplifier, chassis, or DIY audio equipment panel. It allows standard 1/4" stereo instrument or headphone cables to plug in securely, enabling signal transfer in guitars, mixers, studio equipment, and more.
Q: What is the difference between a stereo (TRS) and mono (TS) 1/4" jack?
A: A stereo TRS jack has three contact points — Tip, Ring, and Sleeve — carrying left channel, right channel, and ground signals respectively. A mono TS jack has only two contact points — Tip and Sleeve — for a single audio channel and ground. These panel mount jacks are wired as stereo TRS but can also be used in mono TS configurations depending on your wiring.
Q: How do I mount and solder these panel jack connectors?
A: Drill a hole of the appropriate diameter in your panel or enclosure, insert the jack body through the hole, and tighten the mounting nut on the outside to secure it. Then solder your wires to the solder lugs on the connector — typically Tip for signal, Ring for the second channel (in stereo), and Sleeve for ground. Use a quality soldering iron and rosin-core solder for best results.
Q: Are these connectors compatible with guitar cables and headphone cables?
A: Yes. These 6.35mm (1/4") female panel jacks are fully compatible with standard 1/4" guitar cables, instrument cables, and headphone cables commonly used in audio equipment and musical instruments.
Q: How many connectors come in one pack?
A: Each pack contains 10 individual panel mount audio jack connectors, making it ideal for multi-channel builds, batch repairs, or stocking up for future projects.