1000Mbps PoE Injector 24V 48V 24W Desktop Ethernet Adapter
1000Mbps PoE Injector 24V 48V 24W Desktop Ethernet Adapter
1000Mbps PoE Injector — Gigabit Power over Ethernet for Cameras & Networked Devices
Keep your IP cameras, wireless access points, and other PoE-compatible devices powered and connected with this compact 1000Mbps Power over Ethernet (PoE) Injector. Delivering up to 24W of output power at selectable 24V or 48V, this desktop adapter eliminates the need for separate power runs — one Ethernet cable does it all.
Key Features
- Gigabit Speed: Full 1000Mbps (1 Gbps) data throughput — no bottlenecks to your network.
- Dual Voltage Output: Supports both 24V and 48V PoE standards to work with a wide range of devices.
- 24W Power Delivery: Sufficient wattage for IP cameras, VoIP phones, wireless access points, and more.
- Compact Desktop Design: Slim, space-saving form factor measuring just 88 × 44 × 22 mm — ideal for desk or rack-side placement.
- Plug-and-Play Setup: No configuration required — simply connect your network cable and powered device and you're ready to go.
- Available in 2 color options to complement your workspace or installation environment.
What Is a PoE Injector?
A PoE (Power over Ethernet) Injector adds power-delivery capability to a standard Ethernet network port. Instead of running a separate electrical cable to a remote device, the injector combines data and power into a single Ethernet cable — making installations cleaner, faster, and more cost-effective. It's an essential tool for anyone deploying IP security cameras, outdoor access points, or other remote networked hardware.
Ideal Applications
- CCTV & IP surveillance camera installations
- Wireless access points (WAPs)
- VoIP desk phones
- Network switches and hubs in remote locations
- Smart home and IoT device setups
Technical Specifications
| Data Speed | 1000 Mbps (Gigabit) |
| Output Voltage | 24V / 48V (selectable) |
| Output Current | 0.5A |
| Max Power Output | 24W |
| Dimensions | 88 × 44 × 22 mm |
| Form Factor | Desktop / Compact |
| Color Options | 2 available |
Learn More About Networking Standards
For guidance on network infrastructure and electrical safety in commercial or home installations, visit the NIST Communications Technology Laboratory, which provides standards and resources for networking technologies.
Frequently Asked Questions
Q: What devices are compatible with this 1000Mbps PoE Injector?
A: This PoE injector is compatible with any PoE-enabled device that accepts 24V or 48V passive or standard PoE power, including most IP security cameras, wireless access points, VoIP phones, and IoT devices with an Ethernet port. Always verify your device's voltage requirements before connecting.
Q: Does this PoE injector support 802.3af or 802.3at standards?
A: This injector supports passive PoE at 24V and 48V outputs. While it provides power alongside Gigabit data, please confirm whether your specific device requires passive PoE or IEEE 802.3af/at active PoE, as compatibility may vary by device manufacturer.
Q: How do I set up the PoE injector?
A: Setup is plug-and-play. Connect your router or switch to the "Data In" port, connect your PoE-powered device (e.g., IP camera) to the "PoE Out" port using a standard Ethernet cable, and plug the adapter into a power outlet. No software or configuration is needed.
Q: Is this PoE injector suitable for outdoor camera installations?
A: Yes — the 24W output and Gigabit data support make this injector well-suited for powering outdoor IP cameras and access points. The injector itself is designed for indoor desktop placement; ensure your Ethernet cable and connected devices are rated for outdoor use.