2-Port Gigabit PoE Extender 1000Mbps IEEE 802.3af/at Repeater

Extend your network's reach without sacrificing speed or power delivery. The 2-Port Gigabit PoE Extender lets you push your existing Power over Ethernet setup further — adding up to 100 meters of range per extender while maintaining full 1000Mbps (Gigabit) throughput. Ideal for IP cameras, wireless access points, VoIP phones, and other PoE-powered devices in homes, offices, and commercial surveillance installations.

Compliant with IEEE 802.3af and 802.3at standards, this repeater draws its power directly from the upstream PoE switch or injector — no external power adapter required. Simply plug it inline on your Cat5e/Cat6 cable run and instantly gain an additional 100m of range beyond your switch.

Key Features

• Gigabit Speed: Full 10/100/1000Mbps data rates keep your network fast and responsive
• 2-Port Design: One PoE input port and one PoE output port for seamless in-line installation
• IEEE 802.3af/at Compliant: Works with standard PoE switches and injectors (up to 30W input)
• Plug-and-Play: No configuration needed — connects in seconds with zero software setup
• No External Power Needed: Draws power directly from the upstream PoE source
• Extended Range: Adds up to 100 meters of cable distance beyond your existing PoE switch
• Durable ABS Housing: Compact, lightweight enclosure built for long-term reliability
• Wide Compatibility: Supports IP cameras, access points, VoIP phones, and other 802.3af/at devices

Specifications

• Data Rate: 10/100/1000Mbps (Gigabit)
• Standards: IEEE 802.3af / IEEE 802.3at
• Ports: 2 (1x PoE In, 1x PoE Out)
• Max Cable Extension: Up to 100m per extender
• Housing Material: ABS
• Power Source: Powered via upstream PoE (no adapter required)
• Brand: Qme

Perfect For

• CCTV and IP camera surveillance systems
• Wireless access point installations in large spaces
• VoIP phone deployments across long cable runs
• Any network installation where cable runs exceed standard PoE distance limits

For more information on structured cabling and network infrastructure best practices, visit the NIST Communications Technology Laboratory.

Frequently Asked Questions

Q: What does a PoE Extender do and how does this 2-Port Gigabit PoE Extender work?

A: A PoE (Power over Ethernet) extender repeats both the network data signal and the power signal from your upstream PoE switch or injector, allowing you to extend your cable run by an additional 100 meters. This 2-Port Gigabit PoE Extender is fully plug-and-play — simply connect it inline on your Cat5e/Cat6 cable run and it instantly extends your PoE network reach with no configuration required.

Q: Is this PoE Extender compatible with my existing PoE switch or injector?

A: Yes. The extender is compliant with the IEEE 802.3af and IEEE 802.3at standards, making it compatible with the vast majority of PoE-capable switches, routers, and injectors on the market. It supports data rates up to 1000Mbps (Gigabit) and requires no external power supply — it draws power directly from your upstream PoE source.

Q: What devices can I connect to the output port of this PoE Extender?

A: You can connect any IEEE 802.3af or 802.3at powered device, including IP cameras, CCTV cameras, wireless access points, VoIP phones, and network switches. It is widely used in surveillance camera systems where cameras are located far from the main network switch.

Q: How many PoE Extenders can I daisy-chain together?

A: Multiple units can typically be daisy-chained to further extend the total cable run (each adding up to 100m), though performance may vary depending on cable quality and the total power budget of your upstream PoE switch. Always ensure your PoE switch or injector has sufficient wattage to power all connected devices in the chain.