ANPWOO PoE Injector Splitter 12V 5.5x2.1mm DC Connector
ANPWOO PoE Injector Splitter 12V 5.5x2.1mm DC Connector
ANPWOO PoE Injector Splitter – 12V DC 5.5×2.1mm Cable Connector
Expand and power your home or office network with ease using the ANPWOO PoE Injector Splitter. This compact passive PoE splitter lets you run network data and DC power over a single Ethernet cable — no extra power outlets required near your device. Ideal for IP cameras, wireless access points, and other 12V DC-powered network equipment.
Key Features
- Passive PoE Design: Transmits data on pins 1, 2, 3, 6 and power on pins 4, 5 (+) / 7, 8 (−) over standard Ethernet cable.
- Wide Voltage Support: Compatible with 3V–57V DC input/output. Note: This is a passive (non-converting) splitter — voltage in equals voltage out. Not compatible with standard 48V PoE switches. For 48V PoE switch to 12V camera setups, please contact us for the appropriate active PoE equipment.
- 5.5×2.1mm DC Connectors: Features shielded DC barrel connectors (5.5×2.1mm) on both ends with 13cm lead length and crystal head protective covers for a secure, reliable connection.
- Network Flexibility: Frees your network layout from the limitations of power line placement — run cameras or access points wherever Ethernet reaches.
- Plug-and-Play: No configuration needed. Connect your Ethernet cable, plug in your DC device, and go.
- Compact & Durable: Shielded connectors reduce interference for a stable signal.
Technical Specifications
- Voltage Range: 3V – 57V DC (passive, non-converting)
- DC Connector Size: 5.5 × 2.1mm (both ends)
- Cable Length per End: 13cm
- PoE Mode: Passive – pins 1236 data; pins 45+/78− power
- Connector Protection: Crystal head with protective design on both ends
- Compatible Devices: IP cameras, wireless routers, access points, and other 12V DC network devices
- Brand: ANPWOO
What's in the Box
- PoE Injector Splitter with 5.5×2.1mm DC connectors
For more information on network cabling standards and safe installation of networked devices, visit the U.S. Consumer Product Safety Commission (CPSC) for guidance on electronics safety.
Frequently Asked Questions
Q: What does the ANPWOO PoE Injector Splitter do?
A: The ANPWOO PoE Injector Splitter is a passive PoE adapter that combines or separates network data and DC power over a single Ethernet cable. It uses pins 1, 2, 3, 6 for data transmission and pins 4, 5 (+) / 7, 8 (−) for power delivery, allowing you to power 12V DC devices such as IP cameras or wireless access points without a separate power cable run.
Q: Is this splitter compatible with standard 48V PoE switches?
A: No — this is a passive PoE splitter, meaning it does not convert voltage. Whatever voltage goes in, comes out. It supports 3V–57V DC but cannot step down 48V PoE switch output to 12V. If you need to use a 48V PoE switch to power a 12V camera, you will need an active PoE splitter with voltage conversion. Please contact us for the correct equipment for that setup.
Q: What DC connector size does this splitter use?
A: Both ends of the splitter use standard 5.5×2.1mm barrel DC connectors with shielded, protective crystal head covers and 13cm lead cables, ensuring a snug fit with most IP cameras and 12V network accessories.
Q: Can I use this to expand my home or office network?
A: Yes. The ANPWOO PoE Injector Splitter is ideal for expanding home and office networks where running separate power lines is inconvenient. By delivering both data and power over a single Ethernet cable, it removes the need for a power outlet near each network device.