ESCAM BNC100 Passive Video Balun Transceiver – HDCVI AHD TVI
ESCAM BNC100 Passive Video Balun Transceiver – HDCVI AHD TVI
ESCAM BNC100 Passive Video Balun Transceiver
Extend your CCTV camera system over standard Cat5/Cat6 UTP cable without signal loss. The ESCAM BNC100 Passive Video Balun Transceiver converts coaxial BNC signals to twisted-pair UTP and back again — no power required — making it the go-to solution for installers and homeowners who want to run surveillance video over existing network cabling.
Key Features
- Passive design — zero power consumption; no external power supply needed
- Wide compatibility — supports HDCVI, AHD, TVI, and analogue CCTV cameras up to 8MP HD
-
Impressive range:
- Up to 300 m (≈ 984 ft) for 720P CVI cameras
- Up to 200 m (≈ 656 ft) for 720P AHD cameras
- Up to 200 m (≈ 656 ft) for 720P TVI cameras
- Up to 1,000 m (≈ 3,280 ft) for analogue cameras
- 1-channel passive video balun — straight-through, plug-and-play connection
- BNC to RJ45 interface — connects directly to your DVR's BNC port on one side and UTP Cat5/Cat6 cable on the other
- Compact form factor — 15–20 cm, easy to conceal inside wall boxes or equipment racks
- Model: BNC100 | Brand: ESCAM
What's in the Box
- ESCAM BNC100 Passive Video Balun Transceiver (1 channel)
Specifications
| Model | BNC100 |
| Type | Passive Video Balun Transceiver |
| Interface | BNC (camera/DVR side) + RJ45 (UTP side) |
| Compatible Formats | HDCVI, AHD, TVI, Analogue (up to 8MP) |
| Max Range (Analogue) | 1,000 m / 3,280 ft |
| Max Range (720P HD) | 200–300 m depending on format |
| Cable Type | Cat5 / Cat5e / Cat6 UTP |
| Power Required | None (passive) |
| Size | 15–20 cm |
| Certification | None stated |
Who Is This For?
Whether you're a professional installer running cable through walls or a DIY homeowner upgrading your property's security setup, the BNC100 makes it simple to use affordable Cat5 cable instead of expensive coaxial runs — saving time, money, and effort on every installation.
For further reading on best practices for surveillance and security system installation, visit the U.S. Consumer Product Safety Commission (CPSC) for guidance on safe home electronics usage.
Frequently Asked Questions
Q: What does the ESCAM BNC100 Video Balun Passive Transceiver do?
A: The ESCAM BNC100 is a passive video balun that converts BNC coaxial signals to UTP twisted-pair (Cat5/Cat5e/Cat6) signals, allowing you to transmit CCTV video over standard network cable. It supports HDCVI, AHD, TVI, and analogue camera formats with no external power required.
Q: How far can the BNC100 transmit video signals?
A: The BNC100 can transmit video up to 300 m for 720P CVI cameras, up to 200 m for 720P AHD and TVI cameras, and an impressive up to 1,000 m (3,280 ft) for analogue cameras over Cat5/Cat6 UTP cable.
Q: Is the ESCAM BNC100 compatible with my existing CCTV DVR?
A: Yes — the BNC100 is compatible with any DVR or camera that uses a standard BNC connector, including systems running HDCVI, AHD, TVI, and analogue video formats. Simply connect the BNC end to your DVR or camera and run Cat5/Cat6 UTP cable to the other balun at the opposite end.
Q: Does the BNC100 require a power supply?
A: No. The ESCAM BNC100 is a fully passive device, meaning it requires no external power supply or batteries. It draws no power and works entirely through the signal it carries, making installation straightforward and hassle-free.