ESCAM 10-Pack Passive Video Balun RJ45 CCTV Transceiver – 5 Pairs
ESCAM 10-Pack Passive Video Balun RJ45 CCTV Transceiver – 5 Pairs
ESCAM 5 Pairs (10 Pieces) 1CH Passive Video Balun – RJ45 CCTV Transceiver
Extend your CCTV camera system over standard CAT5/5E/6 UTP cable without running costly coaxial lines. The ESCAM ES-VB01 Passive Video Balun set includes 5 pairs (10 units) of single-channel transceivers that convert BNC video signals to run over twisted-pair Ethernet cable — no external power required. Whether you're installing a new HD surveillance network or upgrading an existing analog system, these baluns deliver clean, interference-resistant video transmission across impressive distances.
Key Features
- Universal HD Compatibility: Works with HD-CVI, HD-TVI, AHD, and standard analog cameras supporting NTSC, PAL, and SECAM video formats.
-
Long-Distance Transmission:
- Up to 450m for 720P CVI cameras
- Up to 250m for 1080P CVI cameras
- Up to 250m for 720P/1080P TVI cameras
- Up to 320m for 720P AHD cameras
- No Power Required: Fully passive design — plug in and go, with zero additional power supply needed at the balun unit itself.
- Superior Noise Immunity: Over 60 dB cross-talk and noise rejection for a clean, stable video signal.
- BNC (Male) Video In/Out: Compatible with standard BNC-M connectors used on most CCTV DVRs and cameras.
- CAT5/5E/6 UTP Cable: Use widely available, low-cost Ethernet cable to replace expensive coaxial runs.
- Power-over-UTP Capable: Can also carry power to cameras over the same cable (see power supply voltage table below).
- Compact & Durable: ABS plastic housing measuring 45mm × 25mm × 21mm — easy to mount and discreet in any installation.
- Value Pack: 10 pieces (5 transmitter/receiver pairs) to cover multiple camera runs in one purchase.
Technical Specifications
| Model | ES-VB01 |
| Item Type | Passive Video Balun / Video Converter |
| Compatible Format | BNC-M |
| Transmission Signal | 1 Channel Video |
| Cable Type | CAT5 / CAT5E / CAT6 UTP |
| Anti-Interference | >60 dB |
| Material | ABS Plastic |
| Dimensions | 45mm × 25mm × 21mm |
| Quantity | 5 Pairs / 10 Pieces |
| Power Required | None (Passive) |
Power-over-UTP Distance Reference
| Power Supply Voltage | 24VAC | 28VAC | 13VDC |
|---|---|---|---|
| Resultant Camera Voltage | 21VAC | 21VAC | 10VDC |
| 100mA Camera | 300m | 700m | 300m |
| 300mA Camera | 100m | 230m | 100m |
| 500mA Camera | 60m | 140m | 60m |
What's in the Box
- 5 × Transmitter Balun Units (camera side)
- 5 × Receiver Balun Units (DVR/NVR side)
For guidance on CCTV and surveillance system best practices, visit the U.S. Consumer Product Safety Commission (CPSC) for general electronics safety information.
Frequently Asked Questions
Q: What is a passive video balun and how does the ESCAM ES-VB01 work?
A: A passive video balun converts a coaxial BNC video signal to run over a standard twisted-pair UTP (CAT5/5E/6) Ethernet cable — and back again — with no external power needed. The ESCAM ES-VB01 simply plugs into your camera's BNC output at one end and your DVR's BNC input at the other, with a standard network cable running between them. This allows you to use affordable, widely available Ethernet cable instead of coaxial cable for your CCTV installation.
Q: Which camera formats are compatible with these passive video baluns?
A: The ESCAM ES-VB01 is compatible with HD-CVI, HD-TVI, AHD, and standard analog cameras. It supports NTSC, PAL, and SECAM video formats, making it suitable for most modern HD analog CCTV systems including 720P and 1080P resolution cameras up to 8MP HD.
Q: How far can I transmit a video signal using these baluns?
A: Transmission distances vary by camera type and resolution: up to 450m for 720P CVI cameras, up to 250m for 1080P CVI cameras, up to 250m for 720P/1080P TVI cameras, and up to 320m for 720P AHD cameras — all using CAT5/5E/6 UTP cable.
Q: How many cameras can I connect with this pack?
A: This pack includes 5 pairs (10 units total), so you can connect up to 5 individual cameras to a DVR or recorder — one transmitter at each camera and one receiver at the DVR end per run.