PoE Power Injector 24V 48V for Wireless AP & Network Switch

2PCS POE Power Supply 24V1A 48V0.5A Network Monitoring Switch Wireless AP Bridge Power Adapter 100Mbps Wall Plug Qme 24V 1A

PoE Power Injector 24V 48V for Wireless AP & Network Switch

$40.49

$40.49 $49.27

PoE Power Injector — 24V 1A / 48V 0.5A for Network Monitoring, Switches & Wireless APs

Keep your network devices powered and performing with this versatile Power over Ethernet (PoE) Power Injector. Compatible with 24V and 48V networking hardware, this wall-plug adapter delivers reliable, consistent power to IP cameras, wireless access points, network switches, and Ethernet bridges — all through a single cable for a clean, clutter-free installation.

Whether you're setting up a home surveillance system, expanding a wireless network, or powering a remote access point, this PoE injector makes deployment fast and straightforward — no separate power runs required.

Key Features

Dual Voltage Output: Supports 24V 1A and 48V 0.5A — compatible with a wide range of PoE-enabled networking devices
100 Mbps Data Pass-Through: Maintains full 100 Mbps network speeds while simultaneously delivering power
Wall-Plug Design: Compact, space-saving form factor that plugs directly into a standard outlet
Broad Compatibility: Works with wireless access points (APs), IP cameras, network monitoring switches, and Ethernet bridges
Stable Power Delivery: Consistent output ensures reliable, uninterrupted performance for connected devices
Simple Plug-and-Play Setup: No software or configuration required — ready to use straight out of the box

Specifications

Output Voltage: 24V DC (1A) / 48V DC (0.5A)
Data Speed: 100 Mbps
Connector: Standard RJ45 Ethernet
Form Factor: Wall-plug / inline injector
Compatible Devices: Wireless APs, IP/CCTV cameras, network switches, Ethernet bridges

What's in the Box

2 × PoE Power Injector (24V 1A / 48V 0.5A)

Perfect For

Home and office wireless network expansion
IP camera and security monitoring installations
Powering remote access points without dedicated power outlets
Network bridge and switch deployments

For more information on safe home networking and device installation best practices, visit the U.S. Consumer Product Safety Commission (CPSC).

Frequently Asked Questions

Q: What devices are compatible with this PoE Power Injector?

A: This PoE injector is compatible with a wide range of networking devices that accept 24V or 48V passive PoE power, including wireless access points (APs), IP and CCTV monitoring cameras, 100 Mbps network switches, and Ethernet bridges. Always verify your device's input voltage requirements before connecting.

Q: What is the difference between 24V 1A and 48V 0.5A output?

A: Both outputs deliver approximately the same total wattage (24W). The 24V 1A setting suits devices that require lower-voltage PoE (common in many wireless APs and smaller IP cameras), while the 48V 0.5A setting is designed for devices that specify a higher voltage input. Check your device's specifications to choose the correct output.

Q: Will this PoE injector slow down my network speed?

A: No. This injector supports 100 Mbps data pass-through, meaning it delivers power to your device without reducing your network's data transmission speed.

Q: Is any configuration or software needed to use this injector?

A: No configuration or software is required. Simply connect the injector between your router/switch and your PoE-compatible device using standard RJ45 Ethernet cables, then plug it into a wall outlet. It's a true plug-and-play solution.