2-Port 100Mbps PoE Extender Network Switch Repeater 802.3af/at
2-Port 100Mbps PoE Extender Network Switch Repeater 802.3af/at
Extend Your PoE Network Coverage Effortlessly
The 2-Port 100Mbps PoE Extender Network Switch Repeater is the smart, plug-and-play solution for stretching your Power over Ethernet network beyond its standard range. Whether you're expanding coverage for IP cameras, wireless access points, or NVR systems, this compact repeater keeps your devices powered and connected — no extra power outlet required.
Key Features
- IEEE 802.3af/at Compliant: Fully compatible with standard PoE switches and injectors for seamless integration into existing networks.
- 100Mbps Fast Ethernet: Supports up to 400Mbps PoE bandwidth to keep data flowing smoothly across all connected devices.
- 2-Port Design: One PoE input port plus one PoE output port — extend your network run by up to 100 metres per extender.
- True Plug-and-Play: No configuration or additional power supply needed. Simply connect and go.
- Compact & Durable Build: Sleek 82 × 52 × 23 mm housing fits neatly in tight spaces, on walls, or in equipment racks.
- Wide Operating Range: Operates reliably from -10°C to 45°C with storage humidity of 5%–90% (non-condensing).
- Certifications: FCC Class A, CE — meets international electromagnetic radiation standards for safe, interference-free operation.
Ideal Applications
- IP Security Cameras & CCTV Systems
- Wireless Access Points (AP)
- Network Video Recorders (NVR)
- VoIP Phones & Smart Building Devices
- Any PoE-enabled network equipment requiring extended cable runs
Technical Specifications
| Standard | IEEE 802.3af / 802.3at |
| Ports | 1 × PoE In, 1 × PoE Out (2-port total) |
| Data Rate | 100Mbps Fast Ethernet |
| PoE Bandwidth | Up to 400Mbps |
| Dimensions | 82 × 52 × 23 mm |
| Operating Temperature | -10°C to 45°C |
| Storage Humidity | 5%–90%, Non-condensing |
| Certifications | FCC Class A, CE |
For more information on network cabling standards and best practices for structured wiring, visit the NIST Communications Technology Laboratory.
Frequently Asked Questions
Q: What does a PoE Extender Network Switch Repeater do?
A: A PoE Extender repeats both the Ethernet data signal and the Power over Ethernet supply, allowing you to extend your network cable run beyond the standard 100-metre limit. This 2-port model supports IEEE 802.3af/at standards, making it compatible with most PoE switches, NVRs, and IP cameras without requiring a separate power source at the extension point.
Q: Is this PoE Extender compatible with my existing PoE switch or NVR?
A: Yes — this extender is compliant with IEEE 802.3af and IEEE 802.3at standards, which are the most widely used PoE protocols. It works seamlessly with the majority of PoE switches, network video recorders (NVR), IP cameras, and wireless access points (AP) that support these standards.
Q: Do I need any configuration or software to set up this PoE Extender?
A: No configuration or software is required. This is a true plug-and-play device — simply connect the incoming PoE cable to the input port and your device to the output port, and it begins working immediately, extending both power and data over your Ethernet line.
Q: How many PoE Extenders can I daisy-chain together?
A: Multiple units can typically be daisy-chained to further extend your network run in 100-metre increments per extender, subject to the total PoE power budget of your upstream switch or injector. Always verify that your PoE source can supply sufficient wattage for all connected devices along the chain.