8858 Micro Hot Air Rework Station – LED Digital 650W
8858 Micro Hot Air Rework Station – LED Digital 650W
8858 Micro Hot Air Rework Soldering Station – LED Digital Display, 650W
The 8858 Micro Hot Air Rework Station is a compact, professional-grade hot air tool built for SMD rework, PCB repair, and electronic component work. Featuring a bright LED digital display, precise temperature and airflow control, and a powerful 650W heating element, this station delivers consistent, repeatable performance for hobbyists and technicians alike.
Key Features
- LED Digital Display – Clear, real-time readout of temperature and fan speed settings at a glance
- 650W Heating Power – Rapid heat-up for efficient SMD soldering, desoldering, and component rework
- Dual Voltage Compatible – Works on 110V and 220V for versatile use at home or in the workshop
- Adjustable Temperature & Airflow – Fine-tune settings to suit delicate or heavy-duty rework tasks
- Compact Micro Design – Lightweight and easy to maneuver; great for tight PCB layouts
- Built-in Fan Motor – 12V / 0.2A internal fan for steady, controlled airflow
- Model 8858 – Widely recognized platform with broad nozzle and accessory compatibility
Specifications
- Model: 8858
- Power: 650W
- Voltage: 110V / 220V (dual voltage)
- Fan: 12V, 0.2A
- Display: LED Digital
Important Safety Note
⚠️ When the set temperature exceeds 300 °C, do not reduce the airflow speed below level 5. Operating at high temperatures with insufficient airflow may damage the heating element. Always allow the unit to cool down on fan-only mode before storing.
What's in the Box
- 1 × 8858 Hot Air Rework Station
- Nozzle attachment(s)
- Power cord
Common Applications
- SMD / SMT component soldering & desoldering
- PCB board repair and rework
- IC chip replacement
- Heat shrink tubing and wire insulation
- Phone, tablet, and laptop motherboard repair
For guidance on safe soldering practices and electronic workshop safety, visit the OSHA Soldering Safety Resource.
Frequently Asked Questions
Q: What is the 8858 Micro Hot Air Rework Station used for?
A: The 8858 Micro Hot Air Rework Station is a professional electronics tool used for SMD soldering, PCB rework, component desoldering, and general hot-air repair tasks. Its LED digital display lets you dial in precise temperature and airflow for a wide range of electronic repair applications.
Q: What voltage does the 8858 Rework Station support?
A: The 8858 supports both 110V and 220V input, making it compatible with standard outlets in North America, Europe, and most other regions. Always verify your local voltage before use.
Q: Is there a minimum airflow setting I should follow at high temperatures?
A: Yes. When operating above 300 °C, keep the fan speed at level 5 or higher. Running the unit at very low airflow during high-temperature work can overheat and damage the internal heating element. Always power down using the cool-down cycle before switching off.
Q: What nozzles or accessories are compatible with the 8858 station?
A: The 8858 is a widely adopted platform and is compatible with a broad range of standard hot-air nozzle sizes including round, rectangular, and IC-specific nozzles available from most electronics component suppliers.