Desoldering Braid Wick 1.5–3.5mm Width 3M – Copper Solder Remover
Desoldering Braid Wick 1.5–3.5mm Width 3M – Copper Solder Remover
Meet your go-to tool for clean, efficient solder removal. This pure copper desoldering braid wicks away unwanted solder quickly and precisely, leaving your PCB pads clean and ready for the next connection. Whether you're reworking BGA components, repairing circuit boards, or doing precision electronics work, this 3-meter wick delivers consistent, professional results every time.
Why Choose This Desoldering Braid?
- Pure Copper Construction: Fine-woven copper strands maximise capillary action, drawing molten solder away from pads effectively and cleanly.
- Multiple Width Options: Available in 1.5mm, 2.0mm, 2.5mm, 3.0mm, and 3.5mm widths — choose the right size for your specific work, from fine SMD pads to larger through-hole joints.
- Generous 3-Metre Length: Plenty of wick to handle multiple projects before needing a replacement.
- Flux-Treated Strands: Pre-applied flux improves heat transfer and solder absorption for faster, cleaner results.
- Ideal for BGA Rework: The precision widths are perfectly suited for BGA soldering repair and fine-pitch component work.
- Easy to Use: Works right out of the box — simply place over the solder joint, apply heat, and watch the solder lift away.
Product Specifications
- Material: Pure copper wire (flux-treated braid)
- Width Options: 1.5mm / 2.0mm / 2.5mm / 3.0mm / 3.5mm
- Length: 3 metres per roll
- Application: PCB repair, BGA rework, through-hole and SMD desoldering
- Available in 5 size variants
Perfect For
- Electronics hobbyists and DIY repair enthusiasts
- Professional PCB technicians and repair shops
- BGA chip rework and removal
- Through-hole component desoldering
- Removing solder bridges and excess tin
For more guidance on safe electronics work and best practices when handling soldering tools, visit the OSHA Soldering Safety Resources.
Frequently Asked Questions
Q: What widths does this desoldering braid come in?
A: This desoldering braid is available in five width options: 1.5mm, 2.0mm, 2.5mm, 3.0mm, and 3.5mm, making it versatile enough for fine SMD pads, BGA rework, and larger through-hole joints.
Q: What is the desoldering braid made from?
A: It is woven from pure copper wire and treated with flux, which enhances heat transfer and capillary action to absorb molten solder quickly and cleanly from PCB pads.
Q: How long is each roll of desoldering braid?
A: Each roll provides 3 metres of desoldering wick, giving you plenty of material for multiple repair and rework sessions.
Q: Is this braid suitable for BGA soldering repairs?
A: Yes — the precision width options, especially the narrower 1.5mm and 2.0mm sizes, are well suited for BGA component rework and fine-pitch SMD desoldering tasks.
Q: How do I use a desoldering braid?
A: Place the tip of the braid over the solder joint you wish to remove, then press a heated soldering iron onto the braid. The heat transfers through the copper strands, melting the solder, which is then drawn up into the braid by capillary action. Snip off the used section and repeat as needed.