ESCAM 5-Pair Passive BNC Video Balun Transceiver for CCTV
ESCAM 5-Pair Passive BNC Video Balun Transceiver for CCTV
ESCAM 5-Pair Passive BNC Video Balun Transceiver for CCTV Cameras
Upgrade your security camera installation with the ESCAM 5-Pair (10-piece) Passive BNC Video Balun Transceiver. Designed for professional and DIY CCTV setups alike, these balun transceivers let you run video and power signals over standard CAT5/CAT6 twisted-pair cable — eliminating the need for costly coaxial runs without sacrificing signal quality.
Why Choose This Video Balun Kit?
- 5 Matched Pairs (10 pcs total): Complete your full camera network in one purchase — one balun at the camera end, one at the DVR/monitor end.
- Passive Design – No Power Required: Simple, reliable signal conversion with zero external power needed. Fewer components, fewer failure points.
- Wide Compatibility: Works with AHD, CVI, TVI, and standard CVBS CCTV cameras. Supports up to 8MP HD resolution signals.
- BNC Male Connector + Press-Fit Terminal Blocks: Quick, tool-free wiring connections for fast installation. BNC interface: 75 ohm standard.
- Versatile Cable Support: Converts COAX BNC signals to UTP (Cat5/Cat5e/Cat6) twisted-pair cable — ideal for extending camera runs over longer distances.
- Compact Build: Cable length approx. 14 cm (5.51 in) — easy to route in tight spaces behind walls, ceilings, or cable conduits.
- 2-Year Warranty: Backed by a 2-year manufacturer warranty for added confidence.
Technical Specifications
| Item Type | Video Balun Transceiver (Passive) |
| Quantity | 5 Pairs (10 pcs) |
| BNC Impedance | 75 Ohm |
| Supported Formats | AHD / CVI / TVI / CVBS, up to 8MP HD |
| Cable Type | UTP CAT5 / CAT5e / CAT6 (Twisted Pair) |
| Connector | Male BNC + Press-Fit Terminal Blocks |
| Cable Length | Approx. 14 cm / 5.51 in |
| Certification | None |
| Warranty | 2 Years |
How It Works
A video balun converts the unbalanced coaxial BNC signal from your CCTV camera into a balanced signal that travels efficiently over twisted-pair UTP Ethernet cable. This allows you to leverage existing Cat5/Cat6 cabling in your building, significantly reducing installation costs. At the other end (DVR, monitor, or NVR), a second balun converts the signal back to standard BNC — no quality loss, no signal interference.
For more guidance on best practices in security camera cabling and installation, visit the U.S. Consumer Product Safety Commission (CPSC) for consumer electronics safety tips.
Package Contents
- 5 × BNC Video Balun Transceiver (Camera/Transmitter End)
- 5 × BNC Video Balun Transceiver (DVR/Receiver End)
Frequently Asked Questions
Q: What types of CCTV cameras are compatible with this BNC video balun transceiver?
A: The ESCAM passive BNC video balun transceiver is compatible with a wide range of analog HD CCTV cameras, including AHD, CVI, TVI, and standard CVBS formats. It supports video signals up to 8MP HD resolution, making it suitable for most modern security camera systems.
Q: Do I need an external power source to use these video baluns?
A: No — these are fully passive balun transceivers, meaning they require no external power supply. Simply connect the BNC end to your camera and the terminal block end to your CAT5/CAT6 cable, and you're ready to go. The passive design also makes them more reliable and easier to install.
Q: How far can I run video signals using these BNC video baluns over twisted-pair cable?
A: Passive video baluns like these typically support runs up to approximately 100–300 metres over quality CAT5e/CAT6 cable, depending on signal format and cable quality. For longer distances, an active (powered) balun set would be recommended instead.
Q: Can these baluns carry both video and power signals?
A: Yes — the press-fit terminal blocks on these balun transceivers allow you to route both video and DC power signals over the same twisted-pair cable, reducing the total number of cables needed in your CCTV installation.