HD CCTV Passive Video Balun BNC to UTP CAT5 Transceiver – 660ft
HD CCTV Passive Video Balun BNC to UTP CAT5 Transceiver – 660ft
HD CCTV Passive Video Balun Transceiver – BNC to UTP CAT5/5e/6, Up to 660ft Range
Extend your CCTV camera system over standard CAT5/5e/6 twisted-pair cable without running costly coaxial lines. These passive video balun transceivers convert BNC coaxial signals to UTP twisted-pair — no power required — making installation clean, fast, and budget-friendly. Compatible with AHD, HDCVI, HDTVI, and CVBS formats up to 1080P resolution, they're an essential upgrade for any HD surveillance setup.
Key Features
- Long-Distance Transmission: Up to 400M (1,300ft) for AHD/CVI signals and 200M (660ft) for TVI signals over CAT5/5e/6 cable.
- Broad Compatibility: Works seamlessly with AHD, HDCVI, HDTVI, and CVBS camera systems — supports resolutions of 720P, 960P, and 1080P.
- No Power Required: Fully passive design — simply plug in and transmit. No external power supply needed.
- Built-In Surge & Transient Protection: ESD protection to IEC61000-4-2 Level 3; coaxial and UTP connectors rated at 2kV/4kV per IEC1000-4-5 for dependable, protected operation.
- Superior Interference Rejection: >80dB anti-interference rating keeps your video signal clean and sharp even in electrically noisy environments.
- Standard Connectors: BNC-M (75Ω) coaxial input/output and push-terminal UTP connector for easy, tool-free cable connection.
- Flexible Cable Options: Available in 2 cable length options to suit your installation needs.
- Worldwide Shipping Available.
Technical Specifications
| Compatible Formats | AHD / HDCVI / HDTVI / CVBS |
| Supported Resolutions | 720P / 960P / 1080P |
| Max Transmission Distance | AHD/CVI: 400M (1,300ft) | TVI: 200M (660ft) |
| Cable Type | UTP CAT5 / CAT5e / CAT6 |
| Coaxial Connector | BNC-M (75Ω) |
| UTP Connector | Push-Terminal |
| Anti-Interference | >80dB |
| ESD Protection | IEC61000-4-2 Level 3 (contact & air discharge) |
| Surge Protection | 2kV / 4kV (IEC1000-4-5) |
| Power Required | None (Passive) |
| Channels | 1 Channel per unit |
What's in the Box
- HD CCTV Passive Video Balun Transceivers (pair)
For more information on CCTV and surveillance system standards, visit the U.S. Consumer Product Safety Commission (CPSC) for guidance on safe installation of electronic security systems.
Frequently Asked Questions
Q: What camera formats are compatible with these CCTV passive video balun transceivers?
A: These passive video balun transceivers are compatible with AHD, HDCVI, HDTVI, and CVBS camera formats, supporting resolutions of 720P, 960P, and 1080P. They work with most modern HD analog CCTV systems using CAT5, CAT5e, or CAT6 UTP twisted-pair cable.
Q: Do these video balun transceivers require a power source?
A: No — these are fully passive devices. They require no external power supply, making installation straightforward and reducing the complexity and cost of your CCTV cabling setup. Simply connect the BNC connector on one end and the push-terminal UTP connector on the other.
Q: What is the maximum transmission distance for these CCTV video baluns?
A: The maximum transmission distance is 400M (approximately 1,300ft) for AHD and HDCVI signals, and 200M (approximately 660ft) for HDTVI signals, when used with CAT5/5e/6 UTP twisted-pair cable.
Q: Are these transceivers protected against electrical surges and interference?
A: Yes. These passive video baluns feature built-in surge and transient protection, with ESD protection rated to IEC61000-4-2 Level 3 and surge protection up to 2kV/4kV per IEC1000-4-5. They also offer greater than 80dB anti-interference rejection for a consistently clear video signal.