PCIe to M.2 NGFF Adapter Card C26 for MacBook Air SSD

PCIe to M.2 NGFF Adapter Converter Card (C26) – Compatible with MacBook Air SSD

Upgrade your storage setup with the C26 PCIe to M.2 NGFF Adapter Converter Card — a reliable, plug-and-play solution for transferring your MacBook Air SSD (12/16-pin) into a standard M.2 Key-M NGFF slot on your desktop or laptop motherboard. Whether you're repurposing an old MacBook Air drive or expanding your system's storage, this compact adapter makes it easy.

Key Features

• Wide Compatibility: Designed for MacBook Air 12-pin and 16-pin SSDs, converting them to a standard M.2 NGFF (Key M) interface.
• PCIe X4 / X2 Support: Works with motherboards that support PCIe X4 or PCIe X2 transfer modes via the M.2 NGFF slot. Note: SSD read/write speeds may be reduced by up to 50% if your M.2 port only supports PCIe X2.
• Simple Installation: Ready to use right out of the box — no additional drivers or software required in most cases.
• Compact & Durable Design: Low-profile card that fits neatly into standard M.2 slots without adding bulk.

Important Compatibility Notes

• The M.2 NGFF slot, SATA-3 port, SATA-4 port, and SATA Express port on most motherboards can only be used one at a time. Using multiple simultaneously may prevent the drive from being recognized.
• Some motherboards require the M.2 port transfer mode to be configured in BIOS settings before the SSD is detected. Consult your motherboard manufacturer's documentation or support team for guidance on BIOS configuration.
• Verify that your motherboard's M.2 NGFF port supports PCIe mode (not SATA-only) before purchasing.

Specifications

• Interface In: MacBook Air SSD (12-pin / 16-pin)
• Interface Out: M.2 NGFF Key-M (PCIe X4 / X2)
• Model: C26
• Brand: Qme

Why Choose the C26 Adapter?

The Qme C26 adapter is a straightforward, cost-effective way to give a retired MacBook Air SSD a second life in a desktop or compatible laptop. It saves you money by reusing existing hardware and is a great choice for tech enthusiasts, IT professionals, and DIY builders alike.

For general guidance on computer hardware compatibility and safe installation practices, visit the U.S. Consumer Product Safety Commission (CPSC).

Frequently Asked Questions

Q: What does the C26 PCIe to M.2 NGFF adapter card do?

A: The C26 adapter converts a MacBook Air 12-pin or 16-pin SSD into an M.2 NGFF Key-M (PCIe) format, allowing you to use your MacBook Air SSD in a compatible desktop or laptop motherboard with an M.2 NGFF slot that supports PCIe X4 or PCIe X2 transfer mode.

Q: Will my SSD run at full speed with this adapter?

A: If your motherboard's M.2 NGFF slot supports PCIe X4 mode, you will get full speed. If it only supports PCIe X2 mode, SSD transfer speeds may be reduced by approximately 50%. Check your motherboard's specifications before use.

Q: What if my SSD is not recognized after installing the adapter?

A: First, ensure that only one storage port (M.2 NGFF, SATA-3, SATA-4, or SATA Express) is active at a time on your motherboard, as using multiple simultaneously can prevent detection. Also verify in your BIOS settings that the M.2 port is set to PCIe transfer mode. Consult your motherboard manufacturer's manual or support service for BIOS configuration instructions.

Q: Is this adapter compatible with MacBook Pro SSDs?

A: The C26 is specifically designed for MacBook Air SSDs using 12-pin or 16-pin connectors. Compatibility with MacBook Pro SSDs depends on the connector type — please verify your SSD's pin count before ordering.