RF Remote Control Switch 1CH Relay Receiver – Garage, LED & Motor
RF Remote Control Switch 1CH Relay Receiver – Garage, LED & Motor
RF Remote Control Switch — 1-Channel Relay Receiver for Garage Doors, LED Lighting & Motors
Take full wireless command of your garage door, LED lights, motor, or pump with this compact and reliable RF Remote Control Switch. Operating on AC 85V–220V, this single-channel relay receiver pairs seamlessly with your existing electrical setup and lets you switch devices on or off from up to 50 metres (164 ft) away — no wiring changes to your controlled device required.
Key Features
- Wide Voltage Compatibility: Works with AC 85V–220V input, supporting a broad range of global electrical standards.
- Dual RF Frequency Support: Choose between 315 MHz or 433.92 MHz to match your existing remote transmitter.
- High Load Capacity: Handles up to 1,500W total load power — suitable for motors, LED strips, pumps, and more.
- Long Remote Range: Reliable wireless control up to 50 metres in open spaces.
- Universal Remote Code Support: Stores up to 20 remote controllers; compatible with learning code and fixed code transmitters (rolling code available on custom order).
- 3C Rated: Rated voltage range 440V and below for safe operation.
- Single-Channel Relay: Clean, dedicated 1CH switching for straightforward installations.
- Cord-Free Operation: Eliminates wall-switch clutter for a tidier, more convenient setup.
Technical Specifications
- Input Voltage: AC 85V – 220V
- Working Voltage: 220V
- Total Load Power: 1,500W
- RF Working Frequency: 315 MHz / 433.92 MHz (optional)
- Remote Control Distance: Up to 50 m (open area)
- Remote Code Storage: Up to 20 transmitters
- Supported Code Types: Learning code, Fixed code (rolling code customisable)
- Switch Type: Single remote control switch
- Rated Voltage Range: 440V and below
- Plug Type: None (hardwired installation)
Wiring Guide
- L — Live wire input (Firewire input)
- N — Neutral wire input
- OUT L — Live wire output
- OUT N — Neutral wire output
Note: If you are not confident working with mains wiring, please consult a qualified electrician for installation.
What Can It Control?
This RF relay receiver is versatile enough to automate a wide variety of devices, including:
- Garage doors & roller shutters
- LED strip lights & LED fixtures
- Electric motors & actuators
- Water pumps & irrigation pumps
- General 220V electrical appliances within load rating
For guidance on safe electrical installation and home automation best practices, visit the U.S. Consumer Product Safety Commission (CPSC) — Home Electrical Safety.
Frequently Asked Questions
Q: What devices can this RF remote control relay switch operate?
A: This RF remote control switch (1-channel relay receiver) is designed to wirelessly control a wide range of AC 85V–220V electrical devices including garage doors, LED lighting, electric motors, and water pumps. It supports a total load power of up to 1,500W, making it suitable for most standard household and light commercial applications.
Q: What RF frequencies does this relay receiver support?
A: The receiver supports both 315 MHz and 433.92 MHz RF frequencies, giving it broad compatibility with many standard remote transmitters. It can store up to 20 remote controllers and works with learning code and fixed code remotes; rolling code support is available as a custom option.
Q: How far away can I use the remote control?
A: In open-area conditions, the RF remote can reliably operate the relay receiver from up to 50 metres (approximately 164 feet) away. Actual range may vary slightly depending on walls, interference, and environmental factors.
Q: Do I need special tools or an electrician to install this switch?
A: The receiver uses a hardwired installation (no plug — it connects directly to your mains wiring). Basic wiring knowledge is helpful; however, if you are unfamiliar with mains electrical work, we strongly recommend having a qualified electrician complete the installation to ensure safe operation.